Authentic Easy Wood Tools Ci2-R2 (2600) Carbide Replacement Cutter with 2" Radius for Easy Start, Mini and Mid Size Roughers Lathe Woodturning Tools

Authentic Easy Wood Tools Ci2-R2 (2600) Carbide Replacement Cutter with 2" Radius for Easy Start, Mini and Mid Size Roughers Lathe Woodturning Tools

• Easy Wood Tools Ci2-R2 Carbide Cutter designed to fit Easy Start, Mini and Mid-Size Roughers; includes new 4-40 screw.
• The perfect grade of carbide produces the best combination of sharpness and durability. Optimal grinding process produces the flattest and truest cutting surfaces. The right geometry or cutting angle is ground to the produce an edge the cuts cleanly and safely.
• Optimal grinding process produces the flattest and truest cutting surfaces. The right geometry or cutting angle is ground to the produce an edge the cuts cleanly and safely.
• Be sure to check out our Ci2 R2 NR -Patented Negative Rake Carbide Cutter - 2600NR (sold separately) when you are ready to turn Resins, Acrylics, Extreme Hardwood, and/or any Man-Made materials. Dramatically eliminates chipping, catches and blowouts when used properly.
• Designed and Manufactured 100% in the USA

This is a Authentic made in the USA Easy Wood Tools (EWT) Ci2-R2 square carbide cutter with a 2" radius designed to fit the Mid, Mini and Easy Start Easy Wood Roughers. Beware of cheap imitations of Easy Wood Tools carbide cutters. Authentic EWT cutters have the optimal 3G's of Carbide - Grade, Grind, and Geometry. 1) The Right Grade: Carbide is basically a mixture of tungsten powder and cobalt that is fused together under high pressure and heat. The ratio of cobalt to tungsten and the size of the tungsten particle are referred to collectively as the 'grade'. There are literally hundreds of thousands of conceivable grades and no 'one grade' of carbide is suited for all applications - whether wood cutting or metal cutting. The perfect combination of cobalt and grain size in EWT Carbide cutters yields a cutting edge that is both the keenest and the most durable grade for woodturning available today. 2) The Right Grind: EWT grinds all of their cutters on super rigid CNC grinders to prevent micro chipping of the cutting edges. EWT uses the proper grit diamond wheels to produce the flattest, truest surfaces possible with minimal grinding scratches left on the surface. All the cutter surfaces are ground in the optimum sequence to bring the edge into keenness during the very last process, or once again micro chipping of the cutting edges will occur if the proper sequence is not followed. 3) The Right Geometry: EWT grinds all their cutters to the correct angles and geometries specifically for woodturning. This produces an edge that cuts both cleanly and safely for all skill levels. Only when grade, grind, and geometry are in harmony will you have a cutting edge for high performance woodturning. Comes with replacement 4-40 countersink machine screw.