UHPPOTE Touch Access Control Keypad with Wiegand 26-bit Interface Support 2000 Users for 125khz RFID Card

UHPPOTE Touch Access Control Keypad with Wiegand 26-bit Interface Support 2000 Users for 125khz RFID Card

• Strong Zinc Alloy Electroplated anti-vandal case
• Full programming from the keypad
• 2000 users, supports Card, PIN, Card+PIN
• Can be used as a standalone keypad
• This keypad can't be compatible with UHF card and encrypted card, for example, the card of following brands: HID, Indala,Cobra, APCiK ,Paradox,Radio,Honeywell, etc.

<p><b>Features:</b><br>Strong Zinc Alloy Electroplated anti-vandal case<br> Full programming from the keypad<br> 2000 users, supports Card, PIN, Card+PIN<br> Can be used as a standalone keypad<br> Backlight keys<br> Wiegand 26 input for connection to external reader or Wiegand 26 output for connection to a controller<br> Adjustable Door Output time, Alarm time, Door Open time<br> Very low power consumption (30mA)<br> Fast operating speed, <20ms with 2000 users<br> Lock output current short circuit protection<br> Easy to install and program<br> Built in light dependent resistor (LDR) for anti tamper<br> Built in buzzer<br> Red, Yellow and Green LEDs display the working status<br>Support four digits worked as stand-alone keypad</p> <p> <b>Specifications:</b><br> Operating Voltage: 12VDC<br> User Capacity: 2000<br> Card Reading Distance: 3-6cm / 1.2-2.4in<br> Frequency: 125KHZ<br> Active Current: <60mA<br> Idle Current: 25±5mA<br> Lock Output Load: Max 3A<br> Alarm Output Load: Max 20A<br> Operating Temperature: -45℃~60℃ / -49℉~140℉<br> Operating Humidity: 10%~90% RH<br>Adjustable Door Relay Time: 0-99 seconds<br> Adjustable Alarm Time: 0-3 minutes<br> Wiegand Interface: Wiegand 26 bit<br> Wiring Connections: Electric Lock, Exit Button, External Alarm<br> Product Size: 155x45x20mm / 6.1x1.8x0.8in<br> Package weight: 330g / 0.73lb</p> <p> <b>Installation:</b><br> Remove the back cover from the keypad using the supplied special screw driver<br> Drill 2 holes on the wall for the Self tapping screws and 1 hole for the cable<br> Put the supplied rubber bungs into the 2 holes<br> Fix the back cover firmly on the wall with 2 Self tapping screws<br> Thread the cable through the cable hole<br> Attach the keypad to the back cover</p> <p> <b>Package includes:</b><br> 1 x Access Control Keypad<br> 1 x Installation Kit<br> 1 x User Manual</p>