UHPPOTE Wired Emergency Fire Alarm Station 9-28VDC Conventional Dual Action Manual Call Point

UHPPOTE Wired Emergency Fire Alarm Station 9-28VDC Conventional Dual Action Manual Call Point

• Attencion: Non UL-Certification Listed
• Key lock available; Dual Action
• The HC102 conventional manual call point designed for conventional fire alarm system for reporting fire or emergency condition by its PUSH IN/PULL DOWN handle latches
• Pushing in and then pulling down on the handle activates the normally-open alarm switch. Once latched in the down position , the word" ACTIVATED" appears at the top in bright yellow, with a portion of the handle protruding at the bottom as a visible flag.
• Note: Call point can't work alone, need work with alarm control panel

<p><b>Operation:</b><br> The manual call points provide a textured finger-hold area that includes Braille text. In addition to PUSH IN and PULL DOWN text, there are arrows indicating how to operate the station, provided for non-English-speaking people.<br> Pushing in and then pulling down on the handle activates the normally-open alarm switch. Once latched in the down position , the word" ACTIVATED" appears at the top in bright yellow, with a portion of the handle protruding at the bottom as a visible flag.<br> Resetting the station is simple: insert the key, twist one quarter-turn, then open the station's front cover, causing the spring-loaded operation handle to return to its original position. The alarm switch can then be reset to its normal(non-alarm) position manually(by hand) or by closing the station's front cover, which automatically resets the switch.</p> <p> <b>Loop design and wiring:</b><br> The fire alarm control panel Zone wire can be connected to terminal loop(+), loop(-) unpolarized wire.<br> If the manual call point is in the end of the zone wire, a 5.6K resistance should be connected to terminal loop(+),loop(-).</p> <p> <b>Installation:</b><br> Note: All wiring must conform to applicable local codes, ordinances, and regulations.</p> <p> <b>Mounting indoor wall</b><br> Attach mounting base to wall at 1.5 meter's(59in) high<br> Connect field wiring to terminals<br> To attach product to mounting base<br> Secure product by tightening the one mounting screws in the front of the product housing.</p> <p> <b>Specifications:</b><br><b>Non UL Listed</b><br> Operating voltage range: 9-28VDC Volts<br> Alarm resistance: 470ohm/1W<br> Operating humidity range: 10% to 93% relative humidity, non-condensing<br> Operating temperature range: -10℃~50℃ (14℉~122℉)<br>Dimensions (LxWxH): 140x104x45mm / 5.51"x4.09"x1.77"<br> Net Weight: 220g / 0.44lb</p> <p> <b>Package:</b><br> 1 x Fire alarm call point<br> 2 x Keys<br> 1 x English manual</p>