General Finishes High Performance Water Based Topcoat, 1 Pint, Semi-Gloss

General Finishes High Performance Water Based Topcoat, 1 Pint, Semi-Gloss

• Do not apply clear topcoats over bright white paint, as yellowing may occur due to a reaction to the substrate. Light color paints may also experience yellowing due to topcoat application, but it will less noticeable.
• The hardest, most durable consumer polyurethane top coat on the market today
• Dry Time Between Coats is only 1 to 2 Hours
• Interior use only

This is one of the hardest, most durable consumer polyurethane top coats on the market today. It is non-yellowing and offers easy water clean-up. It contains all the consumer-friendly characteristics of PolyAcrylic Blend. In addition, it contains a UV Stabilizer to protect it from breaking down in sunlight and to protect the underlying stains from fading. With its pure polyurethane durability, it's a great choice for hardwoodfloors. Details: Dry Time: normally 2-4 hours under ideal conditions (70°, 70% humidity). Cooler temperatures and higher humidity will prolong drying time up to 8-10 hours. Clean up with warm, soapy water Coverage: 75 sq. ft./pint; 150 sq. ft./quart; 600 sq. ft./gallon. Thinning: If necessary, thin with 10-20% water. Direction for use: Oil based stains must be completely dry before using a water based top coat. Wait a minimum of 48 hours before applying GF High Performance. Use a foam brush or paint pad applicator. Apply liberally using smooth, even strokes going with the grain. Use enough material to provide a wet film. Sand between coats using 320 or 400 grit sandpaper. Remove dust before recoating. A minimum of 3 coats is recommended. Additional coats may be applied to increase durability and depth.