Replacement S3213 Fuel Water Separator Filter Kit Assembly Boat Fuel Filter Marine Engine Fuel Water Separator for Mercury Yamaha Outboard 10 Micron

Replacement S3213 Fuel Water Separator Filter Kit Assembly Boat Fuel Filter Marine Engine Fuel Water Separator for Mercury Yamaha Outboard 10 Micron

• BRAND:IVSPEED,Material:The filter is made of aluminum. Anti-oxidation/corrosion. Long service life.
• Include:IVSPEED S3213 assy,PTFE-tape,Memo Pad,Hose Clamp.Features:10 micron filters are over 90% efficient at removing particles as small as 10 microns. 10 micron filters are recommended to prevent damage to sensitive inboard, sterndrive and outboard fuel injection systems.
• Usage:Designed to trap the smallest particles and emulsified water from gasoline.
• Function:It contributes to clear contaminates protect fuel system.
• Water separating canisters:High performance 3/8 NPT ports offer lower pressure drop rates.

Replaces Mercury 35-60494-1 and Universal. <p>How use?<br> 1.Before installing the filter, please check those Tubing and plugs,PTFE-tape is use to Prevent leaks from these plugs.<br> tips:1m PTFE-tape include.<br> 2,install the plugs,Connect the fuel pipe and use the Hose Clamp to lock.<br> 3.All of the above steps are very simple to operate, you can manually disassemble, and then use the tool to install tighten. <p>replace element:<br> 1.Drain the unit by loosens the drain screw.<br> 2.Loosen and remove the filter element.<br> Please ensure that the assembly is stable.<br> 3.Loosen and remove the bowl from filter element.Please note the bowl is reusable,do not dispose unless broken.<br> (Professional tools may be required to remove bowls and filter element)<br> 4.Wipe O-ring gland clean,and coat bowl's sealing O-ring with clean oil or grease and place it back to the gland.The tighten the bowl onto filter element firmly by hand.<br> 5.Coat filter element's sealing O-ring with clean oil or grease and attach filter element onto filter head,and the tighten securely by hand.<br> 6.Run engine and check for fuel leakage. <p>Instructions<br> To Drain Water:<br> 1.off engine,Loosen drain screw to drain bowl of water.<br> 2.Tighten drain screw.<br> 3.Run engine and check for fuel leakage.<br> Warning:<br> Periodically check fittings and filter element for leaks.Be careful when changing fuel filter element .Gasoline is extremely flammable and highly explosive under certain conditions.Avoid spilling gasoline.Always stop engine and do not smoke or allow open flames in the area while changing filter element. <p>Tips:<br> replace element by tool<br> replace element at regular.<br> CHECK THE ELEMENT SUGGEST:EACH 7000KM/400 HOURS. <p>Package include:<br> 1 IVSPEED S3213 assy<br> 1*1M PTFE tape<br> 1*Memo sticker for time or KM when use<br> 2*Miniature Stainless Worm Gear Hose Clamp<br> 1*Manual(some mode)