DASBET 7L Fluid Extractor Manual Oil Changer Vacuum Hand Operated Engine Oil Change Fluid Extractor Hand Pump Tank Remover (7L)

DASBET 7L Fluid Extractor Manual Oil Changer Vacuum Hand Operated Engine Oil Change Fluid Extractor Hand Pump Tank Remover (7L)

• Complete Fluid Extraction Solution: The vacuum fluid extractor is equipped with four tubes of varying diameters that can easily reach the bottom of the oil pan. This versatile fluid extractor allows for the efficient removal of fluids ranging from engine oil to brake fluids. With its generous 7L reservoir and additional hoses, you can effectively access the deepest parts of the reservoir and extract every last drop of oil.
• Specifications: Fluid temperature range: 35°F- 200°F/1°- 95°C; polypropylene hose diameter: 4mm / 6mm / 8mm / 10mm (0.157"/0.236"/0.315"/0.393"); Tank Capacity: 7L; Actual capacity 6.5L; Working pressure: 70-170 PSI.
• Easy Operation: Simplify the process of changing engine oil and transmission fluid with the convenience of the oil extractor. Simply open the hook, insert a suitable hose into the oil pan, and let the oil extractor pump do the work for you. Not limited to places, change oil anytime, anywhere.
• Wide Application: The 7 liter oil extractor is constructed from composite materials and suitable for the extraction of all types of engine and lubricating oils from cars, motorcycles, marine engines, stationary engines and industrial machinery. The oil extractor pump is also suitable for low viscosity fluids such as water.
• Package Included: 1 X 7L Oil Extractor 1 X Φ10mm Nylon Hose 1 X Φ8mm Nylon Hose 1 X Φ6mm Nylon Hose 1 X Φ4mm Nylon Hose 1 X Instruction Manual. Note: If you think the length of the hose is too short, these 4 hoses can be connected to each other and used together, wrapped with tape to avoid leakage.

<b>Including 4 tubes<b/><br/>4mm×39 inches<br/>6mm×39 inches<br/>8mm×37.7 inches<br/>10mm×39.4 inches<br/><br/><br/><b> How To Use 7L Oil Extractor?<b/><br/>1) Warm up the oil by running the engine. This will allow the contaminates to mix and to suspend in the oil. Remove the dipstick. Note: If you can't hold the dipstick comfortably in your hands, then the oil is too hot! Wait for the oil to cool off a bit. <br/>2) Select and insert the appropriate diameter extraction tube into the dipstick pipe until it touches the bottom of the oil pan. Connect the main tube to the top of the unit and to the extraction tube. <br/>3) Pump the handle 4 to 10 times in a row to start the vacuum. The unit will extract the oil automatically. Continuous pumping is not required.<br/>4) After all the oil has been extracted, press the release valve located at the top of the unit for 5 seconds. Remove the main tube. When pouring the oil into a container, hold the pump as in the photo and pour gently. Do not hold it upside down ! Bring the used oil to a recycling depot.