Battery Packs Lithium Ion Battery 3.7v 2000mAh (Not Compatible with PS4 Controller)

Battery Packs Lithium Ion Battery 3.7v 2000mAh (Not Compatible with PS4 Controller)

• Full Charge Output Voltage: 4.2V - 3.7V. Cutoff Voltage (Discharged): 3.0V
• Connector: Genuine JST Connector
• Includes over-charge, over-use, and short circuit protection
• Charging Requirements: LiIon/LiPoly Constant-Voltage/Constant-Current charger at at rate of 2A or less (500mA is best for battery life)
• PS4 WARNING: This battery does not work out of the box as a plugin/hotswap replacement for PS4 Dual Shock controllers. If you wish to use this battery with a PS4 controller you will need to modify the connector which will void the batteries warranty. If you do not make the required modifications and attempt to use this in a PS4 controller the battery will NOT charge and may become connected in reverse polarity which can be dangerous. Only use this battery as intended by the manufacturer.

Lithium ion polymer (also known as 'lipo' or 'lipoly') batteries are thin, light and powerful. The output ranges from 4.2V when completely charged to 3.7V. This battery has a capacity of 2000mAh. If you need a larger (or smaller!) battery, we have a full range of LiPoly batteries. The batteries come pre-attached with a genuine 2-pin JST-PH connector as shown and include the necessary protection circuitry. Because they have a genuine JST connector, not a knock-off, the cable wont snag or get stuck in a matching JST jack, they click in and out smoothly. The included protection circuitry keeps the battery voltage from going too high (over-charging) or low (over-use) which means that the battery will cut-out when completely dead at 3.0V. It will also protect against output shorts. However, even with this protection it is very important that you only use a LiIon/LiPoly constant-voltage/constant-current charger to recharge them and at a rate of 2A or less (500mA is best). We suggest our Micro Lipo charger, which has a 100mA default rate. You can also set the Micro Lipo to 500mA rate for a faster charge. Like most lipos, the batteries we sell do not have thermistors built in. This is why we suggest charging at 1 C or even less - 100 to 500mA is a good rate, and available from any USB port if using a USB-powered charger. Additional safety notes: Do not use a NiMH/NiCad/lead-acid charger! Also, do not abuse these batteries, do not short, bend, crush or puncture. Never charge or use unattended. Always inspect batteries and surrounding circuitry constantly for any damage, loose wiring, or possibility of short circuits. As with all Lithium ion polymer batteries and with any power source - they should be used by experts who are comfortable working with power supplies.