APPLIED MEMBRANES INC. 50 GPD Reverse Osmosis Membrane | RO Membrane Water Filter Replacement for Reverse Osmosis Water Filtration System | 1.8” x 12” Universal Compatibility | Made in USA

APPLIED MEMBRANES INC. 50 GPD Reverse Osmosis Membrane | RO Membrane Water Filter Replacement for Reverse Osmosis Water Filtration System | 1.8” x 12” Universal Compatibility | Made in USA

• The PUREST water – Removes up to 99% of Total Dissolved Solids. Certified to NSF/ANSI 58 for material safety and for the reduction of Arsenic, Barium, Cadmium, Chromium (Hexavalent), Chromium (Trivalent), Copper, Turbidity, Fluoride, Lead, Radium 226/228, Selenium, and TDS.
• The HIGHEST standard – AMI Membranes are manufactured in our Vista, CA ISO 9001: 2015 facility to meet or exceed NSF / ANSI 58 standards
• UNIVERSAL Fit - 50GPD RO membrane fits all standard 1812/2012 2” Inner Diameter (ID) membrane housing and is compatible with almost all under-sink RO systems.
• Post-Sale Support – AMI has been manufacturing RO membranes since 1983 and is the largest USA manufacturer of residential membrane elements. All AMI membranes are backed by a lifetime customer service pledge. We are here to help!
• Ultra Efficient – AMI membranes utilize Spiral Wound design to maximize membrane contaminant rejection down to .0001 Micron, maximize pure water production, and minimize wastewater

AMI Residential RO Membranes produce high quality water and are designed for use in Home RO Systems. These elements are constructed of DOW RO Flat Sheet, are NSF/ANSI Standard 58 listed and are made in the USA in our ISO 9001:2008 Certified manufacturing plant. 100% Quality Check and Integrity Tested, Fits all Standard 2"x12" Home RO Membrane Housing, High Quality RO Membranes with Consistent Performance, Made in the USA using DOW RO Flat Sheet Membrane. Applied Membranes is a major supplier of RO membranes which are sold under the AMI brand. For the past 27 years Applied Membranes has manufactured hundreds of thousands of RO Membranes; these elements have earned the reputation of consistent quality, reliability and performance. This element can be used as replacements in Home RO Systems, and is a direct substitution for the below models: Aqua Flow E50TFC-2 & E50TFC-3, Farris "Economy", Kent Maxxima 50 & RO 50 TFC, Osmotik T112-50, ProLine Plus 5-Stage, PuRO Twist 3000 TFC 50, 4000 TFC 50 & 5000 TFC -50, RO Ultratec TF-1812-50. Performance specifications based on 500 ppm tap water, 50psi (0.35 MPa) applied pressure, 77°F (25°C) feed water temperature, feed water pH 7-8 and 15% recovery. Element permeate flow may vary ± 15%. Maximum operation pressure: 125 psi, Maximum feed flow rate: 2 gpm, Maximum operating temperature: 113° F (45° C), Maximum feed water turbidity: 1 NTU, Maximum feed water SDI (15min): 5, Chlorine tolerance: 0, Feedwater pH range: 2-11, Minimum brine flow to permeate flow ratio: 4:1